VOS3000 Prefix Settings, Rate Prefix, Area Prefix, Client/Vendor Prefix settings in VOS3000 Server in easy ways.

VOS3000 Prefix Settings, Rate Prefix, Area Prefix, Client/Vendor Prefix settings in VOS3000 Server in easy ways.

Hello all,

Many client become confused in prefix settings in VOS3000. Old vos3000 2.1.1.5, 2.1.2.0 and 2.1.2.4 there was only Area Prefix Options, where normally client used prefix plus country code together and they can able to write Area Details (Country Name or Description Manually). But Newer version its added one extra part which is rate prefix and you can’t edit area details – you have to do it from number management. Its because of A2Z route business.

So keep this in simple way use only Area Prefix, i always asked client to forget your vendor/provider prefix. In vos3000 settings everywhere use or remember only your prefix which you want to give clients or your own prefix only. So in rate management for both clients rate and vendor rate you have to use your own prefix. Also same way when you make routing gateway “GW Prefix” will be also your prefix, priority as per you want.

Now only one place you have to use vendor prefix is in Routing GW as per below image:

See the image:

Initial Prefix : Your prefix which you set everywhere

Destinations Prefix : only this place you have to set vendor prefix.

Hope this will be remove your confusions for prefix settings in vos3000.

For anymore help or questions if you have then please feel free to knock me in whatsapp: +8801911119966

Thanks

• VOS3000 Caller Number Pool: Powerful CLI Rotation for Outbound Traffic
• VOS3000 Protect Route: Smart Backup Gateway Activation with Timer
• VOS3000 Outbound Registration: Important Carrier SIP Register Setup
• VOS3000 Scaling: Proven Methods for High-Traffic VoIP Carrier Operations
• VOS3000 SIP Debug: Best Essential Wireshark and Log Analysis Guide