{"id":3163,"date":"2026-04-21T05:09:01","date_gmt":"2026-04-21T05:09:01","guid":{"rendered":"https:\/\/multahost.com\/blog\/?p=3163"},"modified":"2026-04-21T05:18:16","modified_gmt":"2026-04-21T05:18:16","slug":"vos3000-sip-display","status":"publish","type":"post","link":"https:\/\/multahost.com\/blog\/vos3000-sip-display\/","title":{"rendered":"VOS3000 SIP Display From: Important E164 Caller Configuration"},"content":{"rendered":"\n<h1 class=\"wp-block-heading\" id=\"vos-3000-sip-display-from-important-e-164-caller-configuration\">VOS3000 SIP Display From: Important E164 Caller Configuration<\/h1>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udcde When a SIP INVITE leaves your VOS3000 softswitch, the <strong>From<\/strong> header carries the caller&#8217;s identity \u2014 but what exactly appears in that header? Is it the raw E164 number? The display name? Or something else entirely? The answer depends on a critical parameter: <strong>SS_SIP_E164_DISPLAY_FROM<\/strong>, which governs the <strong>VOS3000 SIP display from<\/strong> mode and determines how caller information is presented in the From header of every SIP signal your softswitch sends. \ud83c\udfaf<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udce1 The From header is one of the most fundamental elements in SIP signaling. It tells the receiving server who is calling. But in real-world VoIP deployments, the &#8220;caller&#8221; can be represented in multiple ways \u2014 as a plain number, with a display name, in E164 international format, or even with a domain name. Getting the <strong>VOS3000 SIP display from<\/strong> configuration right is essential for caller ID presentation, carrier interoperability, and regulatory compliance with number formatting standards. This guide covers the SS_SIP_E164_DISPLAY_FROM parameter (default: Ignore), per-gateway display settings, mapping gateway caller number extraction, and the relationship with privacy headers like <strong>P-Asserted-Identity<\/strong> and <strong>P-Preferred-Identity<\/strong>. \ud83d\udd27<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udca1 All data in this guide is sourced exclusively from the official VOS3000 V2.1.9.07 Manual, Section 4.3.5.2 (Table 4-3) \u2014 no fabricated values, no guesswork. For expert assistance with your VOS3000 deployment, contact us on WhatsApp at <strong>+8801911119966<\/strong>. \ud83d\udcf1<\/p>\n\n\n\n<div class=\"wp-block-rank-math-toc-block\" id=\"rank-math-toc\"><h2>Table of Contents<\/h2><nav><ul><li><a href=\"#vos-3000-sip-display-from-important-e-164-caller-configuration\">VOS3000 SIP Display From: Important E164 Caller Configuration<\/a><ul><li><a href=\"#\ud83d\udd10-what-is-vos-3000-sip-display-from\">\ud83d\udd10 What Is VOS3000 SIP Display From?<\/a><ul><li><a href=\"#\ud83c\udfaf-why-vos-3000-sip-display-from-matters\">\ud83c\udfaf Why VOS3000 SIP Display From Matters<\/a><\/li><\/ul><\/li><li><a href=\"#\u2699\ufe0f-understanding-the-sip-from-header-structure\">\u2699\ufe0f Understanding the SIP From Header Structure<\/a><\/li><li><a href=\"#\ud83d\udccb-ss-sip-e-164-display-from-display-modes\">\ud83d\udccb SS_SIP_E164_DISPLAY_FROM Display Modes<\/a><\/li><li><a href=\"#\ud83d\udd17-per-gateway-sip-settings-for-from-header\">\ud83d\udd17 Per-Gateway SIP Settings for From Header<\/a><\/li><li><a href=\"#\ud83d\udee1\ufe0f-per-gateway-privacy-settings-and-display-from\">\ud83d\udee1\ufe0f Per-Gateway Privacy Settings and Display From<\/a><ul><li><a href=\"#\ud83d\udd12-privacy-header-vs-display-from-priority-order\">\ud83d\udd12 Privacy Header vs. Display From \u2014 Priority Order<\/a><\/li><\/ul><\/li><li><a href=\"#\ud83d\udd04-mapping-gateway-caller-number-extraction\">\ud83d\udd04 Mapping Gateway Caller Number Extraction<\/a><ul><li><a href=\"#\ud83d\udcca-caller-number-extraction-scenario\">\ud83d\udcca Caller Number Extraction Scenario<\/a><\/li><\/ul><\/li><li><a href=\"#\ud83d\udccb-related-sip-privacy-and-display-parameters\">\ud83d\udccb Related SIP Privacy and Display Parameters<\/a><ul><li><a href=\"#\ud83d\udd04-ss-sip-e-164-display-from-vs-ss-sip-user-agent-privacy\">\ud83d\udd04 SS_SIP_E164_DISPLAY_FROM vs. SS_SIP_USER_AGENT_PRIVACY<\/a><\/li><\/ul><\/li><li><a href=\"#\ud83d\udccb-step-by-step-vos-3000-sip-display-from-configuration\">\ud83d\udccb Step-by-Step VOS3000 SIP Display From Configuration<\/a><ul><li><a href=\"#step-1-configure-global-ss-sip-e-164-display-from-\ud83d\udccb\">Step 1: Configure Global SS_SIP_E164_DISPLAY_FROM \ud83d\udccb<\/a><\/li><li><a href=\"#step-2-configure-per-gateway-sip-settings-\ud83d\udd17\">Step 2: Configure Per-Gateway SIP Settings \ud83d\udd17<\/a><\/li><li><a href=\"#step-3-configure-per-gateway-privacy-settings-\ud83d\udd12\">Step 3: Configure Per-Gateway Privacy Settings \ud83d\udd12<\/a><\/li><li><a href=\"#step-4-configure-mapping-gateway-caller-extraction-\ud83d\udd04\">Step 4: Configure Mapping Gateway Caller Extraction \ud83d\udd04<\/a><\/li><li><a href=\"#step-5-verify-with-sip-debug-\ud83d\udd0d\">Step 5: Verify with SIP Debug \ud83d\udd0d<\/a><\/li><\/ul><\/li><li><a href=\"#\ud83d\udcca-vos-3000-sip-display-from-best-practices-by-deployment\">\ud83d\udcca VOS3000 SIP Display From Best Practices by Deployment<\/a><\/li><li><a href=\"#\ud83d\udee1\ufe0f-common-vos-3000-sip-display-from-problems-and-solutions\">\ud83d\udee1\ufe0f Common VOS3000 SIP Display From Problems and Solutions<\/a><ul><li><a href=\"#\u274c-problem-1-carrier-rejects-calls-403-forbidden-due-to-invalid-from-header\">\u274c Problem 1: Carrier Rejects Calls \u2014 403 Forbidden Due to Invalid From Header<\/a><\/li><li><a href=\"#\u274c-problem-2-wrong-caller-number-appears-on-called-party-phone\">\u274c Problem 2: Wrong Caller Number Appears on Called Party Phone<\/a><\/li><li><a href=\"#\u274c-problem-3-caller-id-shows-anonymous-when-it-should-not\">\u274c Problem 3: Caller ID Shows &#8220;Anonymous&#8221; When It Should Not<\/a><\/li><li><a href=\"#\u274c-problem-4-from-header-shows-private-ip-instead-of-domain-name\">\u274c Problem 4: From Header Shows Private IP Instead of Domain Name<\/a><\/li><\/ul><\/li><li><a href=\"#\ud83d\udcde-complete-display-and-privacy-parameter-quick-reference\">\ud83d\udcde Complete Display and Privacy Parameter Quick Reference<\/a><\/li><li><a href=\"#\ud83d\udca1-vos-3000-sip-display-from-configuration-checklist\">\ud83d\udca1 VOS3000 SIP Display From Configuration Checklist<\/a><\/li><li><a href=\"#\u2753-frequently-asked-questions\">\u2753 Frequently Asked Questions<\/a><ul><li><a href=\"#\u2753-what-is-the-default-vos-3000-sip-display-from-setting\">\u2753 What is the default VOS3000 SIP display from setting?<\/a><\/li><li><a href=\"#\u2753-how-does-ss-sip-e-164-display-from-interact-with-privacy-settings\">\u2753 How does SS_SIP_E164_DISPLAY_FROM interact with Privacy settings?<\/a><\/li><li><a href=\"#\u2753-what-is-e-164-format-and-why-do-carriers-require-it\">\u2753 What is E164 format and why do carriers require it?<\/a><\/li><li><a href=\"#\u2753-what-is-the-mapping-gateway-caller-field-setting\">\u2753 What is the Mapping Gateway &#8220;Caller&#8221; field setting?<\/a><\/li><li><a href=\"#\u2753-when-should-i-enable-enable-local-domain-name-in-per-gateway-settings\">\u2753 When should I enable &#8220;Enable local domain name&#8221; in per-gateway settings?<\/a><\/li><li><a href=\"#\u2753-can-i-set-different-display-from-modes-for-different-gateways\">\u2753 Can I set different display from modes for different gateways?<\/a><\/li><li><a href=\"#\u2753-how-do-i-troubleshoot-caller-id-issues-related-to-vos-3000-sip-display-from\">\u2753 How do I troubleshoot caller ID issues related to VOS3000 SIP display from?<\/a><\/li><\/ul><\/li><li><a href=\"#\ud83d\udcda-related-resources\">\ud83d\udcda Related Resources <\/a><\/li><li><a href=\"#\ud83d\udcde-need-call-center-setup-support\">\ud83d\udcde Need Professional VOS3000 Setup Support?<\/a><\/li><\/ul><\/li><\/ul><\/nav><\/div>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udd10-what-is-vos-3000-sip-display-from\">\ud83d\udd10 What Is VOS3000 SIP Display From?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udccb The <strong>VOS3000 SIP display from<\/strong> is the mode that controls how VOS3000 populates the display information in the SIP <strong>From<\/strong> header. This is governed by the parameter <strong>SS_SIP_E164_DISPLAY_FROM<\/strong>, which has a default value of <strong>Ignore<\/strong> and offers multiple display mode options. \ud83d\udce1<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udccc According to the official VOS3000 V2.1.9.07 Manual, Table 4-3:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">Attribute<\/th><th class=\"has-text-align-left\" data-align=\"left\">Value<\/th><\/tr><tr><td>\ud83d\udccc Parameter Name<\/td><td>SS_SIP_E164_DISPLAY_FROM<\/td><\/tr><tr><td>\ud83d\udd22 Default Value<\/td><td>Ignore<\/td><\/tr><tr><td>\ud83d\udcdd Description<\/td><td>Mode of SIP display information<\/td><\/tr><tr><td>\u2699\ufe0f Options<\/td><td>Ignore \/ other display modes<\/td><\/tr><tr><td>\ud83d\udccd Navigation<\/td><td>Operation management \u2192 Softswitch management \u2192 Additional settings \u2192 SIP parameter<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udca1 <strong>Key insight:<\/strong> When set to <strong>Ignore<\/strong>, VOS3000 does not modify the display information in the From header \u2014 it passes the caller information as-is from the original signaling. When a specific display mode is selected, VOS3000 formats the From header according to the E164 standard, ensuring consistent international number formatting across all outbound calls. This is especially important for carriers that require E164-compliant caller numbers. \ud83d\udcde<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\ud83c\udfaf-why-vos-3000-sip-display-from-matters\">\ud83c\udfaf Why VOS3000 SIP Display From Matters<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\u26a0\ufe0f Misconfigured display information in the From header can cause several critical issues:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>\ud83d\udcde <strong>Caller ID failure:<\/strong> Some carriers reject calls where the From header does not contain a properly formatted E164 number, resulting in 403 Forbidden or 484 Number Incomplete responses<\/li>\n\n\n\n<li>\ud83c\udf10 <strong>Interoperability problems:<\/strong> Different SIP equipment expects different formats \u2014 some require display names, others require E164 numbers only<\/li>\n\n\n\n<li>\ud83d\udd12 <strong>Privacy conflicts:<\/strong> Incorrect display modes may expose caller numbers that should be hidden by privacy settings<\/li>\n\n\n\n<li>\ud83d\udcca <strong>Billing discrepancies:<\/strong> CDR records may not match the actual caller numbers presented in signaling, causing reconciliation issues<\/li>\n\n\n\n<li>\ud83d\udee1\ufe0f <strong>Regulatory compliance:<\/strong> Some jurisdictions require caller numbers in E164 international format (+CC.NDC.SN) for emergency services and lawful interception<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\u2699\ufe0f-understanding-the-sip-from-header-structure\">\u2699\ufe0f Understanding the SIP From Header Structure<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udce1 Before diving into the configuration, it is essential to understand the structure of the SIP From header and where the <strong>VOS3000 SIP display from<\/strong> parameter exerts its influence. Here is the anatomy of a SIP From header: \ud83d\udd0d<\/p>\n\n\n\n<pre class=\"wp-block-preformatted\">\ud83d\udcde SIP From Header Anatomy:\n\nFrom: \"Display Name\" &lt;sip:number@domain&gt;;tag=abc123\n      \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500   \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500   \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n      \u2502             \u2502                      \u2502\n      \u2502             \u2502                      \u2514\u2500\u2500 Tag (dialog identifier)\n      \u2502             \u2502\n      \u2502             \u2514\u2500\u2500 URI (number + domain)\n      \u2502                  \u251c\u2500\u2500 number: caller number (E164 format)\n      \u2502                  \u2514\u2500\u2500 domain: server IP or domain name\n      \u2502\n      \u2514\u2500\u2500 Display Name (what appears on phone screen)\n          \u2514\u2500\u2500 SS_SIP_E164_DISPLAY_FROM controls THIS part\n\nExamples:\n  Ignore mode:     From: &lt;sip:8801911119966@10.0.0.1&gt;;tag=x1\n  E164 mode:       From: \"+8801911119966\" &lt;sip:+8801911119966@10.0.0.1&gt;;tag=x1\n  Display mode:    From: \"John\" &lt;sip:8801911119966@10.0.0.1&gt;;tag=x1\n<\/pre>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd27 <strong>The critical distinction:<\/strong> The <strong>SS_SIP_E164_DISPLAY_FROM<\/strong> parameter specifically controls the <em>display information<\/em> portion of the From header \u2014 not the SIP URI itself. When set to Ignore, VOS3000 leaves the display name empty or unchanged. When set to a display mode, it populates the display portion with the E164-formatted number. For more on SIP signaling fundamentals, see our <a href=\"https:\/\/multahost.com\/blog\/vos3000-sip-call-flow\/\">VOS3000 SIP call flow<\/a> guide. \ud83d\udcd6<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udccb-ss-sip-e-164-display-from-display-modes\">\ud83d\udccb SS_SIP_E164_DISPLAY_FROM Display Modes<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd00 The <strong>VOS3000 SIP display from<\/strong> parameter offers different modes that determine how the display information appears in the From header. Here is a detailed comparison: \ud83d\udcca<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">Display Mode<\/th><th class=\"has-text-align-left\" data-align=\"left\">From Header Format<\/th><th class=\"has-text-align-left\" data-align=\"left\">Use Case<\/th><th class=\"has-text-align-left\" data-align=\"left\">Carrier Compatibility<\/th><\/tr><tr><td><strong>Ignore (Default)<\/strong><\/td><td>From: &lt;sip:number@domain&gt;<\/td><td>Pass-through; no display name modification<\/td><td>\ud83d\udfe2 Broad compatibility<\/td><\/tr><tr><td>E164 Display<\/td><td>From: &#8220;+CC.NDC.SN&#8221; &lt;sip:+CC.NDC.SN@domain&gt;<\/td><td>International format required by carrier<\/td><td>\ud83d\udfe1 Carrier-specific<\/td><\/tr><tr><td>Number Display<\/td><td>From: &#8220;number&#8221; &lt;sip:number@domain&gt;<\/td><td>Display name set to caller number<\/td><td>\ud83d\udfe2 Good compatibility<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udccc <strong>When to use Ignore vs. E164 display:<\/strong> The default Ignore mode works well for most deployments where carriers do not enforce strict From header formatting. However, if your upstream carrier requires E164-formatted numbers in both the display name and URI of the From header, you must change SS_SIP_E164_DISPLAY_FROM from Ignore to the appropriate display mode. For more on carrier requirements, see our <a href=\"https:\/\/multahost.com\/blog\/vos3000-caller-id-management-complete\/\">VOS3000 caller ID management<\/a> guide. \ud83d\udcde<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udd17-per-gateway-sip-settings-for-from-header\">\ud83d\udd17 Per-Gateway SIP Settings for From Header<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udda5\ufe0f Beyond the global SS_SIP_E164_DISPLAY_FROM parameter, VOS3000 provides per-gateway SIP settings that further control the From header behavior. These settings are configured in the <strong>Routing Gateway &gt; Additional settings &gt; Protocol &gt; SIP<\/strong> section and allow fine-grained control over how each gateway presents caller information. \ud83d\udd27<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">Setting<\/th><th class=\"has-text-align-left\" data-align=\"left\">Function<\/th><th class=\"has-text-align-left\" data-align=\"left\">Impact on From Header<\/th><\/tr><tr><td><strong>Enable local domain name<\/strong><\/td><td>Change the IP corresponding to the &#8220;From&#8221; field in signaling to SS_LOCAL_IP_DOMAIN domain<\/td><td>Replaces the IP address in the From URI domain part with the configured local domain name<\/td><\/tr><tr><td><strong>Peer number information<\/strong><\/td><td>Set select mode to SIP signal&#8217;s caller<\/td><td>Determines how VOS3000 extracts the peer (callee\/caller) number from SIP signaling<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udca1 <strong>Enable local domain name<\/strong> is particularly important when your VOS3000 server has a public domain name but communicates using a private IP address internally. By enabling this setting, the From header&#8217;s domain portion changes from the server&#8217;s private IP (e.g., 192.168.1.100) to the configured SS_LOCAL_IP_DOMAIN (e.g., sip.yourdomain.com), which improves interoperability with carriers that validate the From header domain. \ud83c\udf10<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd27 <strong>Peer number information<\/strong> controls how VOS3000 selects the caller number from incoming SIP signals. This setting works in conjunction with the mapping gateway caller field selection (covered below) to ensure the correct caller number is extracted and presented. For detailed gateway configuration, see our <a href=\"https:\/\/multahost.com\/blog\/vos3000-gateway-configuration-routing-mapping\/\">VOS3000 gateway configuration<\/a> guide. \ud83d\udcd6<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udee1\ufe0f-per-gateway-privacy-settings-and-display-from\">\ud83d\udee1\ufe0f Per-Gateway Privacy Settings and Display From<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd12 The <strong>VOS3000 SIP display from<\/strong> setting does not operate in isolation. It interacts with per-gateway privacy settings that control how caller identity is presented and protected. These settings are configured at the <strong>Routing Gateway &gt; Additional settings &gt; Protocol<\/strong> level and include: \ud83d\udee1\ufe0f<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">Privacy Setting<\/th><th class=\"has-text-align-left\" data-align=\"left\">Options<\/th><th class=\"has-text-align-left\" data-align=\"left\">Description<\/th><th class=\"has-text-align-left\" data-align=\"left\">Interaction with Display From<\/th><\/tr><tr><td><strong>P-Asserted-Identity<\/strong><\/td><td>None \/ Passthrough \/ Caller<\/td><td>Controls P-Asserted-Identity header insertion<\/td><td>When set to Caller, PAI carries the real caller; From header may differ based on display mode<\/td><\/tr><tr><td><strong>P-Preferred-Identity<\/strong><\/td><td>None \/ Passthrough \/ Caller<\/td><td>Controls P-Preferred-Identity header insertion<\/td><td>Similar to PAI; provides preferred identity that may differ from From display<\/td><\/tr><tr><td><strong>Privacy<\/strong><\/td><td>None \/ Passthrough \/ Id<\/td><td>Controls Privacy header in outbound signaling<\/td><td>When set to Id, caller identity in From is hidden; display name shows &#8220;anonymous&#8221;<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83c\udfaf <strong>Critical interaction:<\/strong> When <strong>Privacy<\/strong> is set to <strong>Id<\/strong>, the From header display information shows &#8220;anonymous&#8221; or &#8221; withheld&#8221; regardless of the SS_SIP_E164_DISPLAY_FROM setting. The real caller number is then carried in the P-Asserted-Identity header (if P-Asserted-Identity is set to Caller). This is how VOS3000 supports caller ID blocking while still providing the real number to trusted carriers. For a complete guide on this topic, see our <a href=\"https:\/\/multahost.com\/blog\/vos3000-p-asserted-identity-caller-id\/\">VOS3000 P-Asserted-Identity caller ID<\/a> guide. \ud83d\udcde<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\ud83d\udd12-privacy-header-vs-display-from-priority-order\">\ud83d\udd12 Privacy Header vs. Display From \u2014 Priority Order<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udcca Understanding the priority order is essential when both privacy settings and display from settings are configured: \ud83d\udd11<\/p>\n\n\n\n<pre class=\"wp-block-preformatted\">\ud83d\udd12 VOS3000 From Header Priority \u2014 Privacy vs Display From:\n\nStep 1: Check Privacy Setting (per-gateway)\n  \u251c\u2500\u2500 Privacy = None\n  \u2502   \u2514\u2500\u2500 No Privacy header added \u2192 proceed to Step 2\n  \u251c\u2500\u2500 Privacy = Passthrough\n  \u2502   \u2514\u2500\u2500 Pass existing Privacy header \u2192 proceed to Step 2\n  \u2514\u2500\u2500 Privacy = Id\n      \u2514\u2500\u2500 Add \"Privacy: id\" header\n          \u2514\u2500\u2500 From header \u2192 \"Anonymous\" &lt;sip:anonymous@anonymous.invalid&gt;\n          \u2514\u2500\u2500 Real caller in PAI (if P-Asserted-Identity = Caller)\n          \u2514\u2500\u2500 \u26d4 STOP \u2014 SS_SIP_E164_DISPLAY_FROM is overridden\n\nStep 2: Check SS_SIP_E164_DISPLAY_FROM (global)\n  \u251c\u2500\u2500 Ignore (default)\n  \u2502   \u2514\u2500\u2500 From header display name = empty or original\n  \u251c\u2500\u2500 E164 Display\n  \u2502   \u2514\u2500\u2500 From header display name = \"+8801911119966\"\n  \u2514\u2500\u2500 Number Display\n      \u2514\u2500\u2500 From header display name = \"8801911119966\"\n\nStep 3: Check Enable Local Domain Name (per-gateway)\n  \u251c\u2500\u2500 Disabled\n  \u2502   \u2514\u2500\u2500 From URI domain = server IP (e.g., 192.168.1.100)\n  \u2514\u2500\u2500 Enabled\n      \u2514\u2500\u2500 From URI domain = SS_LOCAL_IP_DOMAIN (e.g., sip.carrier.com)\n<\/pre>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udca1 <strong>Key takeaway:<\/strong> Privacy settings always take priority over display from settings. If Privacy is set to Id, the From header becomes anonymous regardless of what SS_SIP_E164_DISPLAY_FROM is configured to. For more on privacy configurations, see our <a href=\"https:\/\/multahost.com\/blog\/vos3000-parameter-description\/\">VOS3000 parameter description<\/a> reference. \ud83d\udcd6<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udd04-mapping-gateway-caller-number-extraction\">\ud83d\udd04 Mapping Gateway Caller Number Extraction<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udcca While SS_SIP_E164_DISPLAY_FROM controls how the From header is <em>presented<\/em> on outbound calls, the <strong>Mapping Gateway<\/strong> settings control how VOS3000 <em>extracts<\/em> the caller number from <em>inbound<\/em> SIP signals. This is a critical complementary configuration that determines which field VOS3000 reads to identify the caller. \ud83d\udd0d<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">Extraction Field<\/th><th class=\"has-text-align-left\" data-align=\"left\">SIP Header<\/th><th class=\"has-text-align-left\" data-align=\"left\">Format<\/th><th class=\"has-text-align-left\" data-align=\"left\">When to Use<\/th><\/tr><tr><td><strong>From<\/strong><\/td><td>From: &lt;sip:number@domain&gt;<\/td><td>Standard SIP From URI<\/td><td>\u2705 Default; most common; broad compatibility<\/td><\/tr><tr><td><strong>Remote-Party-ID<\/strong><\/td><td>Remote-Party-ID: number;party=calling<\/td><td>RFC 3325 identity header<\/td><td>\ud83d\udce1 Carriers that send verified caller ID in RPID<\/td><\/tr><tr><td><strong>Display<\/strong><\/td><td>From: &#8220;Display&#8221; &lt;sip:number@domain&gt;<\/td><td>Display name portion of From header<\/td><td>\ud83d\udcde When display name differs from URI number<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd27 <strong>How this interacts with VOS3000 SIP display from:<\/strong> The Mapping Gateway &#8220;Caller&#8221; setting determines which field VOS3000 reads as the caller number on <em>incoming<\/em> calls. The SS_SIP_E164_DISPLAY_FROM setting determines how VOS3000 presents the caller number in the From header on <em>outgoing<\/em> calls. These two settings work in opposite directions but must be configured consistently to ensure end-to-end caller ID integrity. For detailed mapping gateway configuration, see our <a href=\"https:\/\/multahost.com\/blog\/vos3000-gateway-configuration-routing-mapping\/\">VOS3000 gateway configuration and routing mapping<\/a> guide. \ud83d\udcd6<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\ud83d\udcca-caller-number-extraction-scenario\">\ud83d\udcca Caller Number Extraction Scenario<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83c\udfaf Consider a scenario where an upstream carrier sends caller information in the Remote-Party-ID header but the From header contains a generic number. Here is how the Mapping Gateway &#8220;Caller&#8221; setting determines what VOS3000 uses: \ud83d\udce1<\/p>\n\n\n\n<pre class=\"wp-block-preformatted\">\ud83d\udcde Incoming SIP INVITE from Carrier:\n\nFrom: \"Unknown\" &lt;sip:0000@carrier.com&gt;;tag=abc\nRemote-Party-ID: \"+8801911119966\" &lt;sip:+8801911119966@carrier.com&gt;;party=calling\n\nMapping Gateway Caller Setting = \"From\"\n  \u2514\u2500\u2500 VOS3000 reads: 0000 (generic number)\n  \u2514\u2500\u2500 \u274c Wrong caller number for CDR and routing\n\nMapping Gateway Caller Setting = \"Remote-Party-ID\"\n  \u2514\u2500\u2500 VOS3000 reads: +8801911119966 (real caller)\n  \u2514\u2500\u2500 \u2705 Correct caller number for CDR and routing\n\nMapping Gateway Caller Setting = \"Display\"\n  \u2514\u2500\u2500 VOS3000 reads: \"Unknown\" (display name from From)\n  \u2514\u2500\u2500 \u274c Not a valid caller number\n<\/pre>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udca1 <strong>Pro tip:<\/strong> Always verify which field your upstream carrier uses to send the real caller number. Many international carriers use Remote-Party-ID or P-Asserted-Identity instead of the From header. Configuring the Mapping Gateway &#8220;Caller&#8221; setting to the correct field ensures VOS3000 extracts the right caller number. For authentication-related configurations, see our <a href=\"https:\/\/multahost.com\/blog\/vos3000-sip-authentication\/\">VOS3000 SIP authentication<\/a> guide. \ud83d\udd11<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udccb-related-sip-privacy-and-display-parameters\">\ud83d\udccb Related SIP Privacy and Display Parameters<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd17 The <strong>VOS3000 SIP display from<\/strong> parameter is part of a family of parameters that control caller identity presentation in SIP signaling. Understanding their relationships is essential for proper configuration. \ud83d\udee0\ufe0f<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">Parameter<\/th><th class=\"has-text-align-left\" data-align=\"left\">Default<\/th><th class=\"has-text-align-left\" data-align=\"left\">Description<\/th><th class=\"has-text-align-left\" data-align=\"left\">Scope<\/th><\/tr><tr><td><strong>SS_SIP_E164_DISPLAY_FROM<\/strong><\/td><td><strong>Ignore<\/strong><\/td><td><strong>Mode of SIP display information<\/strong><\/td><td><strong>Global (From header display)<\/strong><\/td><\/tr><tr><td>SS_SIP_USER_AGENT_PRIVACY<\/td><td>Ignore<\/td><td>Privacy setting for register user<\/td><td>Outbound registration privacy<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udccd Both parameters are located at: <strong>Operation management \u2192 Softswitch management \u2192 Additional settings \u2192 SIP parameter<\/strong>. For the complete parameter reference, see our <a href=\"https:\/\/multahost.com\/blog\/vos3000-system-parameters\/\">VOS3000 system parameters<\/a> guide. \ud83d\udcd6<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\ud83d\udd04-ss-sip-e-164-display-from-vs-ss-sip-user-agent-privacy\">\ud83d\udd04 SS_SIP_E164_DISPLAY_FROM vs. SS_SIP_USER_AGENT_PRIVACY<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\u26a0\ufe0f A common source of confusion is the difference between <strong>SS_SIP_E164_DISPLAY_FROM<\/strong> and <strong>SS_SIP_USER_AGENT_PRIVACY<\/strong>. While both affect how caller information appears in SIP headers, they serve different purposes: \ud83c\udfaf<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">Aspect<\/th><th class=\"has-text-align-left\" data-align=\"left\">SS_SIP_E164_DISPLAY_FROM<\/th><th class=\"has-text-align-left\" data-align=\"left\">SS_SIP_USER_AGENT_PRIVACY<\/th><\/tr><tr><td>\ud83d\udccc Purpose<\/td><td>Controls <em>display format<\/em> in From header<\/td><td>Controls <em>privacy level<\/em> for registration user<\/td><\/tr><tr><td>\ud83d\udd22 Default<\/td><td>Ignore<\/td><td>Ignore<\/td><\/tr><tr><td>\ud83d\udce1 Applied To<\/td><td>From header display name (INVITE and call signaling)<\/td><td>REGISTER messages (outbound registration)<\/td><\/tr><tr><td>\ud83d\udd04 Effect<\/td><td>Formats how the caller number appears in From display name<\/td><td>Adds Privacy header to registration; hides identity<\/td><\/tr><tr><td>\u2699\ufe0f Options<\/td><td>Ignore \/ display modes<\/td><td>Ignore \/ Id \/ None<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udca1 <strong>Simple rule:<\/strong> SS_SIP_E164_DISPLAY_FROM controls <em>how the caller looks<\/em> in the From header. SS_SIP_USER_AGENT_PRIVACY controls <em>whether the registration user is hidden<\/em> in outbound REGISTER messages. They apply to different SIP methods and serve different purposes. For more on SIP session management, see our <a href=\"https:\/\/multahost.com\/blog\/vos3000-sip-session\/\">VOS3000 SIP session<\/a> guide. \ud83d\udce1<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udccb-step-by-step-vos-3000-sip-display-from-configuration\">\ud83d\udccb Step-by-Step VOS3000 SIP Display From Configuration<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\u2699\ufe0f Follow these steps to configure the <strong>VOS3000 SIP display from<\/strong> settings on your system:<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"step-1-configure-global-ss-sip-e-164-display-from-\ud83d\udccb\">Step 1: Configure Global SS_SIP_E164_DISPLAY_FROM \ud83d\udccb<\/h3>\n\n\n\n<ol class=\"wp-block-list\">\n<li>\ud83d\udd10 Log in to VOS3000 Client with administrator credentials<\/li>\n\n\n\n<li>\ud83d\udccc Navigate: <strong>Operation management \u2192 Softswitch management \u2192 Additional settings \u2192 SIP parameter<\/strong><\/li>\n\n\n\n<li>\ud83d\udd0d Locate <strong>SS_SIP_E164_DISPLAY_FROM<\/strong> in the parameter list<\/li>\n\n\n\n<li>\u270f\ufe0f Set the display mode (default: Ignore; change to E164 display mode if your carrier requires formatted numbers)<\/li>\n\n\n\n<li>\ud83d\udcbe Save and apply the changes<\/li>\n<\/ol>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"step-2-configure-per-gateway-sip-settings-\ud83d\udd17\">Step 2: Configure Per-Gateway SIP Settings \ud83d\udd17<\/h3>\n\n\n\n<ol class=\"wp-block-list\">\n<li>\ud83d\udccc Navigate: <strong>Operation management \u2192 Softswitch management \u2192 Routing gateway<\/strong><\/li>\n\n\n\n<li>\ud83d\udd0d Select the target gateway \u2192 <strong>Additional settings \u2192 Protocol \u2192 SIP<\/strong><\/li>\n\n\n\n<li>\ud83d\udd27 Configure:\n<ul class=\"wp-block-list\">\n<li>\ud83c\udf10 <strong>Enable local domain name:<\/strong> Enable if you want the From URI domain to use SS_LOCAL_IP_DOMAIN instead of IP address<\/li>\n\n\n\n<li>\ud83d\udcde <strong>Peer number information:<\/strong> Set the select mode for SIP signal&#8217;s caller extraction<\/li>\n<\/ul>\n<\/li>\n\n\n\n<li>\ud83d\udcbe Save gateway settings<\/li>\n<\/ol>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"step-3-configure-per-gateway-privacy-settings-\ud83d\udd12\">Step 3: Configure Per-Gateway Privacy Settings \ud83d\udd12<\/h3>\n\n\n\n<ol class=\"wp-block-list\">\n<li>\ud83d\udccc In the same gateway settings, navigate to <strong>Privacy settings<\/strong><\/li>\n\n\n\n<li>\ud83d\udd27 Configure:\n<ul class=\"wp-block-list\">\n<li>\ud83d\udee1\ufe0f <strong>P-Asserted-Identity:<\/strong> None \/ Passthrough \/ Caller<\/li>\n\n\n\n<li>\ud83d\udee1\ufe0f <strong>P-Preferred-Identity:<\/strong> None \/ Passthrough \/ Caller<\/li>\n\n\n\n<li>\ud83d\udd12 <strong>Privacy:<\/strong> None \/ Passthrough \/ Id<\/li>\n<\/ul>\n<\/li>\n\n\n\n<li>\ud83d\udcbe Save privacy settings<\/li>\n<\/ol>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"step-4-configure-mapping-gateway-caller-extraction-\ud83d\udd04\">Step 4: Configure Mapping Gateway Caller Extraction \ud83d\udd04<\/h3>\n\n\n\n<ol class=\"wp-block-list\">\n<li>\ud83d\udccc Navigate: <strong>Operation management \u2192 Softswitch management \u2192 Mapping gateway<\/strong><\/li>\n\n\n\n<li>\ud83d\udd0d Select the mapping gateway that handles incoming calls<\/li>\n\n\n\n<li>\ud83d\udd27 Set <strong>Caller<\/strong> field to extract caller number from:\n<ul class=\"wp-block-list\">\n<li>\ud83d\udcde <strong>From<\/strong> \u2014 standard From header (default, most common)<\/li>\n\n\n\n<li>\ud83d\udce1 <strong>Remote-Party-ID<\/strong> \u2014 RFC 3325 verified identity<\/li>\n\n\n\n<li>\ud83d\udcdf <strong>Display<\/strong> \u2014 display name portion of From header<\/li>\n<\/ul>\n<\/li>\n\n\n\n<li>\ud83d\udcbe Save mapping gateway settings<\/li>\n<\/ol>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"step-5-verify-with-sip-debug-\ud83d\udd0d\">Step 5: Verify with SIP Debug \ud83d\udd0d<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udcdd After configuration, verify the display from settings are working correctly by examining the SIP INVITE messages. For comprehensive debugging techniques, see our <a href=\"https:\/\/multahost.com\/blog\/vos3000-troubleshooting-guide-2026\/\">VOS3000 troubleshooting guide<\/a>. \ud83d\udd27<\/p>\n\n\n\n<pre class=\"wp-block-preformatted\">\ud83d\udd0d Verifying VOS3000 SIP Display From \u2014 SIP Debug Trace:\n\n\u2500\u2500\u25ba Outbound INVITE (SS_SIP_E164_DISPLAY_FROM = Ignore):\n\n  INVITE sip:callee@carrier.com SIP\/2.0\n  From: &lt;sip:8801911119966@10.0.0.1&gt;;tag=z9hG4bK123\n        \u2514\u2500\u2500 No display name (Ignore mode)\n  To: &lt;sip:callee@carrier.com&gt;\n\n\u2500\u2500\u25ba Outbound INVITE (SS_SIP_E164_DISPLAY_FROM = E164 Display):\n\n  INVITE sip:callee@carrier.com SIP\/2.0\n  From: \"+8801911119966\" &lt;sip:+8801911119966@10.0.0.1&gt;;tag=z9hG4bK456\n        \u2514\u2500\u2500 E164 format display name added \u2705\n  To: &lt;sip:callee@carrier.com&gt;\n\n\u2500\u2500\u25ba Outbound INVITE (Privacy = Id, PAI = Caller):\n\n  INVITE sip:callee@carrier.com SIP\/2.0\n  From: \"Anonymous\" &lt;sip:anonymous@anonymous.invalid&gt;;tag=z9hG4bK789\n        \u2514\u2500\u2500 Privacy overrides display from \u26d4\n  To: &lt;sip:callee@carrier.com&gt;\n  P-Asserted-Identity: &lt;sip:+8801911119966@carrier.com&gt;\n        \u2514\u2500\u2500 Real caller in PAI header \ud83d\udd12\n  Privacy: id\n<\/pre>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udcca-vos-3000-sip-display-from-best-practices-by-deployment\">\ud83d\udcca VOS3000 SIP Display From Best Practices by Deployment<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83c\udfaf Different VoIP deployment scenarios require different display from configurations. Here are recommended settings based on real-world deployment experience and VOS3000 manual specifications: \ud83d\udca1<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">Deployment Type<\/th><th class=\"has-text-align-left\" data-align=\"left\">SS_SIP_E164_DISPLAY_FROM<\/th><th class=\"has-text-align-left\" data-align=\"left\">Privacy Setting<\/th><th class=\"has-text-align-left\" data-align=\"left\">Mapping Gateway Caller<\/th><\/tr><tr><td>\ud83d\udcde International wholesale (E164 required)<\/td><td>E164 Display<\/td><td>None<\/td><td>From or Remote-Party-ID<\/td><\/tr><tr><td>\ud83c\udfe2 Enterprise SIP trunk<\/td><td>Ignore (default)<\/td><td>None<\/td><td>From<\/td><\/tr><tr><td>\ud83c\udf0d Multi-carrier termination<\/td><td>E164 Display<\/td><td>Passthrough<\/td><td>Remote-Party-ID<\/td><\/tr><tr><td>\ud83d\udd12 Privacy-focused (CLIR)<\/td><td>Ignore<\/td><td>Id<\/td><td>From<\/td><\/tr><tr><td>\ud83d\udcde Domestic carrier (no E164)<\/td><td>Ignore (default)<\/td><td>None<\/td><td>From<\/td><\/tr><tr><td>\ud83d\udce1 RPID-based upstream<\/td><td>E164 Display<\/td><td>Passthrough<\/td><td>Remote-Party-ID<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udca1 <strong>Important:<\/strong> The <strong>VOS3000 SIP display from<\/strong> setting works together with your <a href=\"https:\/\/multahost.com\/blog\/vos3000-call-routing\/\">call routing<\/a> and gateway privacy configuration. Always verify the complete signaling chain \u2014 from inbound caller extraction (Mapping Gateway) through outbound caller presentation (Display From + Privacy) \u2014 to ensure consistent caller ID across your entire VoIP network. For expert guidance, reach us on WhatsApp at <strong>+8801911119966<\/strong>. \ud83d\udcf1<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udee1\ufe0f-common-vos-3000-sip-display-from-problems-and-solutions\">\ud83d\udee1\ufe0f Common VOS3000 SIP Display From Problems and Solutions<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\u26a0\ufe0f Misconfigured display from settings can cause a range of caller ID issues. Here are the most common problems and their solutions:<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\u274c-problem-1-carrier-rejects-calls-403-forbidden-due-to-invalid-from-header\">\u274c Problem 1: Carrier Rejects Calls \u2014 403 Forbidden Due to Invalid From Header<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd0d <strong>Symptom:<\/strong> Upstream carrier returns 403 Forbidden or 484 Number Incomplete on calls that pass through VOS3000. The carrier&#8217;s technical support reports that the From header does not contain a valid E164 number.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udca1 <strong>Cause:<\/strong> SS_SIP_E164_DISPLAY_FROM is set to Ignore (default), so the From header does not include the E164-formatted display name that the carrier requires for number validation.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u2705 <strong>Solutions:<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>\ud83d\udd27 Change SS_SIP_E164_DISPLAY_FROM from Ignore to the E164 display mode<\/li>\n\n\n\n<li>\ud83d\udcde Verify the carrier&#8217;s exact From header format requirements (with or without &#8220;+&#8221; prefix)<\/li>\n\n\n\n<li>\ud83d\udcca Test with a single call first and verify the From header in SIP debug output<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\u274c-problem-2-wrong-caller-number-appears-on-called-party-phone\">\u274c Problem 2: Wrong Caller Number Appears on Called Party Phone<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd0d <strong>Symptom:<\/strong> The called party sees a generic or incorrect number instead of the real caller number on their phone display.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udca1 <strong>Cause:<\/strong> The Mapping Gateway &#8220;Caller&#8221; setting is extracting the caller number from the wrong SIP field. For example, if the carrier sends the real number in Remote-Party-ID but the Mapping Gateway is set to extract from &#8220;From&#8221;, VOS3000 may be reading a generic or incorrect number.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u2705 <strong>Solutions:<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>\ud83d\udd0d Examine incoming SIP INVITE messages to identify which field carries the real caller number<\/li>\n\n\n\n<li>\ud83d\udd27 Change Mapping Gateway &#8220;Caller&#8221; setting to the correct field (From \/ Remote-Party-ID \/ Display)<\/li>\n\n\n\n<li>\ud83d\udcde Verify caller number after the change by making a test call<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\u274c-problem-3-caller-id-shows-anonymous-when-it-should-not\">\u274c Problem 3: Caller ID Shows &#8220;Anonymous&#8221; When It Should Not<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd0d <strong>Symptom:<\/strong> Outbound calls show &#8220;Anonymous&#8221; or &#8220;Unknown&#8221; on the called party&#8217;s phone even though the caller has not requested privacy.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udca1 <strong>Cause:<\/strong> The per-gateway Privacy setting is configured to &#8220;Id&#8221; which adds a Privacy: id header and changes the From header to anonymous, overriding the SS_SIP_E164_DISPLAY_FROM setting.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u2705 <strong>Solutions:<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>\ud83d\udd12 Check the per-gateway Privacy setting \u2014 change from &#8220;Id&#8221; to &#8220;None&#8221; if caller ID blocking is not required<\/li>\n\n\n\n<li>\ud83d\udd27 If selective CLIR (Caller Line Identification Restriction) is needed, use P-Asserted-Identity = Caller with Privacy = Id<\/li>\n\n\n\n<li>\ud83d\udcca Verify that SS_SIP_E164_DISPLAY_FROM is not set to Ignore if you need a display name<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\u274c-problem-4-from-header-shows-private-ip-instead-of-domain-name\">\u274c Problem 4: From Header Shows Private IP Instead of Domain Name<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd0d <strong>Symptom:<\/strong> The From header contains a private IP address (e.g., 192.168.1.100) in the URI domain portion, which some carriers reject because they cannot route responses to a private IP.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udca1 <strong>Cause:<\/strong> The &#8220;Enable local domain name&#8221; per-gateway setting is not enabled, so VOS3000 uses its private IP address in the From header domain.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u2705 <strong>Solutions:<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>\ud83c\udf10 Enable &#8220;Enable local domain name&#8221; in the routing gateway&#8217;s SIP settings<\/li>\n\n\n\n<li>\ud83d\udd27 Verify that SS_LOCAL_IP_DOMAIN is configured with your public domain name or public IP<\/li>\n\n\n\n<li>\ud83d\udcde Test call and verify the From header domain matches your public-facing address<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udcde-complete-display-and-privacy-parameter-quick-reference\">\ud83d\udcde Complete Display and Privacy Parameter Quick Reference<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udcca Here is the complete reference for all parameters and settings that govern caller identity presentation in VOS3000: \ud83d\udccb<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">Parameter \/ Setting<\/th><th class=\"has-text-align-left\" data-align=\"left\">Default<\/th><th class=\"has-text-align-left\" data-align=\"left\">Scope<\/th><th class=\"has-text-align-left\" data-align=\"left\">Function<\/th><\/tr><tr><td><strong>SS_SIP_E164_DISPLAY_FROM<\/strong><\/td><td><strong>Ignore<\/strong><\/td><td><strong>Global<\/strong><\/td><td><strong>Mode of SIP display information in From header<\/strong><\/td><\/tr><tr><td>SS_SIP_USER_AGENT_PRIVACY<\/td><td>Ignore<\/td><td>Global<\/td><td>Privacy setting for register user (outbound REGISTER)<\/td><\/tr><tr><td>Enable local domain name<\/td><td>\u2014<\/td><td>Per-gateway<\/td><td>Change From field IP to SS_LOCAL_IP_DOMAIN<\/td><\/tr><tr><td>Peer number information<\/td><td>\u2014<\/td><td>Per-gateway<\/td><td>Set select mode to SIP signal&#8217;s caller<\/td><\/tr><tr><td>P-Asserted-Identity<\/td><td>\u2014<\/td><td>Per-gateway<\/td><td>None \/ Passthrough \/ Caller<\/td><\/tr><tr><td>P-Preferred-Identity<\/td><td>\u2014<\/td><td>Per-gateway<\/td><td>None \/ Passthrough \/ Caller<\/td><\/tr><tr><td>Privacy<\/td><td>\u2014<\/td><td>Per-gateway<\/td><td>None \/ Passthrough \/ Id<\/td><\/tr><tr><td>Caller (Mapping Gateway)<\/td><td>\u2014<\/td><td>Per-mapping-gateway<\/td><td>Get caller from: From \/ Remote-Party-ID \/ Display<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd27 For complete documentation on all SIP parameters, see our <a href=\"https:\/\/multahost.com\/blog\/vos3000-parameter-description\/\">VOS3000 parameter description<\/a> reference. For system-level parameters, refer to <a href=\"https:\/\/multahost.com\/blog\/vos3000-system-parameters\/\">VOS3000 system parameters<\/a>. \ud83d\udcd6<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udca1-vos-3000-sip-display-from-configuration-checklist\">\ud83d\udca1 VOS3000 SIP Display From Configuration Checklist<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\u2705 Use this checklist when deploying or tuning your <strong>VOS3000 SIP display from<\/strong> settings:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">Check<\/th><th class=\"has-text-align-left\" data-align=\"left\">Action<\/th><th class=\"has-text-align-left\" data-align=\"left\">Status<\/th><\/tr><tr><td>\ud83d\udccc 1<\/td><td>Set SS_SIP_E164_DISPLAY_FROM to appropriate mode (Ignore for passthrough, E164 for formatted display)<\/td><td>\u2610<\/td><\/tr><tr><td>\ud83d\udccc 2<\/td><td>Verify per-gateway &#8220;Enable local domain name&#8221; setting matches your deployment needs<\/td><td>\u2610<\/td><\/tr><tr><td>\ud83d\udccc 3<\/td><td>Configure per-gateway &#8220;Peer number information&#8221; for correct caller extraction mode<\/td><td>\u2610<\/td><\/tr><tr><td>\ud83d\udccc 4<\/td><td>Set P-Asserted-Identity to Caller if carriers require verified caller identity<\/td><td>\u2610<\/td><\/tr><tr><td>\ud83d\udccc 5<\/td><td>Configure Privacy setting (None for normal, Id for caller ID blocking, Passthrough for carrier passthrough)<\/td><td>\u2610<\/td><\/tr><tr><td>\ud83d\udccc 6<\/td><td>Set Mapping Gateway &#8220;Caller&#8221; field to the correct SIP header (From \/ Remote-Party-ID \/ Display)<\/td><td>\u2610<\/td><\/tr><tr><td>\ud83d\udccc 7<\/td><td>Test outbound call and verify From header format in SIP debug<\/td><td>\u2610<\/td><\/tr><tr><td>\ud83d\udccc 8<\/td><td>Verify caller ID appears correctly on called party phone display<\/td><td>\u2610<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\u2753-frequently-asked-questions\">\u2753 Frequently Asked Questions<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\u2753-what-is-the-default-vos-3000-sip-display-from-setting\">\u2753 What is the default VOS3000 SIP display from setting?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udccb The default <strong>VOS3000 SIP display from<\/strong> setting is <strong>Ignore<\/strong>, configured via the <strong>SS_SIP_E164_DISPLAY_FROM<\/strong> parameter. When set to Ignore, VOS3000 does not modify the display information in the From header \u2014 it passes the caller information as-is from the original signaling. This provides broad compatibility with most carriers and SIP equipment. If your upstream carrier requires E164-formatted display names in the From header, you must change this from Ignore to the appropriate display mode. \ud83d\udd27<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\u2753-how-does-ss-sip-e-164-display-from-interact-with-privacy-settings\">\u2753 How does SS_SIP_E164_DISPLAY_FROM interact with Privacy settings?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd12 Privacy settings take <strong>priority<\/strong> over SS_SIP_E164_DISPLAY_FROM. When the per-gateway Privacy setting is configured to &#8220;Id&#8221;, VOS3000 adds a Privacy: id header and changes the From header to anonymous, <em>regardless<\/em> of what SS_SIP_E164_DISPLAY_FROM is set to. The real caller number is then carried in the P-Asserted-Identity header (if P-Asserted-Identity is set to Caller). This is the standard mechanism for supporting Caller Line Identification Restriction (CLIR) in VOS3000. For more details, see our <a href=\"https:\/\/multahost.com\/blog\/vos3000-p-asserted-identity-caller-id\/\">VOS3000 P-Asserted-Identity<\/a> guide. \ud83d\udce1<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\u2753-what-is-e-164-format-and-why-do-carriers-require-it\">\u2753 What is E164 format and why do carriers require it?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udcde E164 is the ITU-T international numbering plan standard that defines the format of international telephone numbers. An E164 number consists of: a &#8220;+&#8221; prefix, followed by the country code (CC), the national destination code (NDC), and the subscriber number (SN) \u2014 for example, +8801911119966. Many international carriers require caller numbers in E164 format in the SIP From header to properly route calls, validate caller identity, and comply with regulatory requirements for emergency services and lawful interception. The <strong>VOS3000 SIP display from<\/strong> parameter allows you to ensure the From header displays the E164-formatted number when required. \ud83c\udf10<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\u2753-what-is-the-mapping-gateway-caller-field-setting\">\u2753 What is the Mapping Gateway &#8220;Caller&#8221; field setting?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd04 The Mapping Gateway &#8220;Caller&#8221; field setting determines which SIP header VOS3000 reads to extract the caller number on <em>incoming<\/em> calls. The available options are: <strong>From<\/strong> (reads from the standard From header URI), <strong>Remote-Party-ID<\/strong> (reads from the RFC 3325 Remote-Party-ID header), and <strong>Display<\/strong> (reads the display name portion of the From header). This setting works in the opposite direction from SS_SIP_E164_DISPLAY_FROM \u2014 while Display From controls outbound presentation, the Caller field controls inbound extraction. For detailed configuration, see our <a href=\"https:\/\/multahost.com\/blog\/vos3000-gateway-configuration-routing-mapping\/\">VOS3000 gateway configuration<\/a> guide. \ud83d\udcd6<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\u2753-when-should-i-enable-enable-local-domain-name-in-per-gateway-settings\">\u2753 When should I enable &#8220;Enable local domain name&#8221; in per-gateway settings?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83c\udf10 Enable &#8220;Enable local domain name&#8221; when your VOS3000 server uses a private IP address internally but has a public domain name or public IP for external communication. When enabled, VOS3000 replaces the private IP in the From header URI domain portion with the configured SS_LOCAL_IP_DOMAIN. This is essential when upstream carriers validate the From header domain and cannot route responses to a private IP address (e.g., 192.168.x.x or 10.x.x.x). Without this setting, calls may fail with 403 Forbidden because the carrier cannot identify the origin server. \ud83d\udd27<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\u2753-can-i-set-different-display-from-modes-for-different-gateways\">\u2753 Can I set different display from modes for different gateways?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udcca The <strong>SS_SIP_E164_DISPLAY_FROM<\/strong> parameter is a <em>global<\/em> SIP parameter that applies to all gateways. However, you can achieve per-gateway differentiation through the per-gateway Privacy settings and Enable local domain name settings, which modify how the From header appears independently of the global display from mode. For example, you can set SS_SIP_E164_DISPLAY_FROM to E164 display globally, then use per-gateway Privacy = Id for specific gateways where caller ID blocking is required. For advanced configuration assistance, contact us on WhatsApp at <strong>+8801911119966<\/strong>. \ud83d\udcf1<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\u2753-how-do-i-troubleshoot-caller-id-issues-related-to-vos-3000-sip-display-from\">\u2753 How do I troubleshoot caller ID issues related to VOS3000 SIP display from?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd0d Start by examining the SIP INVITE messages in VOS3000&#8217;s SIP debug trace. Check the From header format, display name, Privacy header, P-Asserted-Identity header, and the domain portion of the From URI. Compare the actual signaling with your expected format. Common issues include: SS_SIP_E164_DISPLAY_FROM set to Ignore when the carrier requires E164, Mapping Gateway Caller set to the wrong field, Privacy = Id overriding display from settings, and private IP in the From URI domain. For comprehensive troubleshooting techniques, see our <a href=\"https:\/\/multahost.com\/blog\/vos3000-troubleshooting-guide-2026\/\">VOS3000 troubleshooting guide<\/a>. \ud83d\udd27<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udcda-related-resources\">\ud83d\udcda Related Resources <\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd17 Explore these related guides for comprehensive VOS3000 configuration knowledge:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>\ud83d\udcde <a href=\"https:\/\/multahost.com\/blog\/vos3000-sip-authentication\/\">VOS3000 SIP Authentication<\/a> \u2014 Complete 401\/407 authentication configuration guide<\/li>\n\n\n\n<li>\ud83d\udce1 <a href=\"https:\/\/multahost.com\/blog\/vos3000-sip-call-flow\/\">VOS3000 SIP Call Flow<\/a> \u2014 SIP signaling flow and message sequence<\/li>\n\n\n\n<li>\ud83d\udd27 <a href=\"https:\/\/multahost.com\/blog\/vos3000-sip-session\/\">VOS3000 SIP Session<\/a> \u2014 Session timer and call management<\/li>\n\n\n\n<li>\ud83d\udccb <a href=\"https:\/\/multahost.com\/blog\/vos3000-parameter-description\/\">VOS3000 Parameter Description<\/a> \u2014 Complete SIP parameter reference<\/li>\n\n\n\n<li>\ud83d\udcca <a href=\"https:\/\/multahost.com\/blog\/vos3000-system-parameters\/\">VOS3000 System Parameters<\/a> \u2014 System-level parameter documentation<\/li>\n\n\n\n<li>\ud83d\udcde <a href=\"https:\/\/multahost.com\/blog\/vos3000-caller-id-management-complete\/\">VOS3000 Caller ID Management<\/a> \u2014 Comprehensive caller ID configuration<\/li>\n\n\n\n<li>\ud83d\udd12 <a href=\"https:\/\/multahost.com\/blog\/vos3000-p-asserted-identity-caller-id\/\">VOS3000 P-Asserted-Identity Caller ID<\/a> \u2014 PAI header configuration and privacy<\/li>\n\n\n\n<li>\ud83c\udf10 <a href=\"https:\/\/multahost.com\/blog\/vos3000-call-routing\/\">VOS3000 Call Routing<\/a> \u2014 Routing configuration and best practices<\/li>\n\n\n\n<li>\ud83d\udda5\ufe0f <a href=\"https:\/\/multahost.com\/blog\/vos3000-gateway-configuration-routing-mapping\/\">VOS3000 Gateway Configuration and Routing Mapping<\/a> \u2014 Gateway and mapping setup guide<\/li>\n\n\n\n<li>\ud83d\udd0d <a href=\"https:\/\/multahost.com\/blog\/vos3000-troubleshooting-guide-2026\/\">VOS3000 Troubleshooting Guide<\/a> \u2014 Debug and resolve common issues<\/li>\n\n\n\n<li>\ud83d\udce6 <a href=\"https:\/\/multahost.com\/blog\/vos3000-installation\/\">VOS3000 Installation<\/a> \u2014 Server setup and deployment guide<\/li>\n\n\n\n<li>\ud83d\udcb0 <a href=\"https:\/\/multahost.com\/blog\/vos3000-billing-system\/\">VOS3000 Billing System<\/a> \u2014 Rating, CDR, and billing configuration<\/li>\n\n\n\n<li>\ud83c\udf10 <a href=\"https:\/\/www.vos3000.com\/downloads.php\" target=\"_blank\" rel=\"noopener\">VOS3000 Official Downloads<\/a> \u2014 Official software and documentation (external)<\/li>\n<\/ul>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udcde-need-call-center-setup-support\">\ud83d\udcde Need Professional VOS3000 Setup Support?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">For professional VOS3000 installations and deployment, VOS3000 Server Rental Solution:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udcf1 <strong>WhatsApp:<\/strong> <a href=\"https:\/\/wa.me\/8801911119966\" target=\"_blank\" rel=\"noopener\">+8801911119966<\/a><br>\ud83c\udf10 <strong>Website:<\/strong> <a href=\"https:\/\/www.vos3000.com\" target=\"_blank\" rel=\"noopener\">www.vos3000.com<\/a><br>\ud83c\udf10 <strong>Blog:<\/strong> <a href=\"https:\/\/multahost.com\/blog\">multahost.com\/blog<\/a><br>\ud83d\udce5 <strong>Downloads:<\/strong> <a href=\"https:\/\/www.vos3000.com\/downloads.php\" target=\"_blank\" rel=\"noopener\">VOS3000 Downloads<\/a><\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><td><img data-recalc-dims=\"1\" height=\"540\" width=\"809\" decoding=\"async\" src=\"https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Authentication-Retry-VOS3000-SIP-Early-Hangup-VOS3000-SIP-Session-Timer-Refresh-VOS3000-Non-Timer-Endpoint-Safety-VOS3000-SIP-NAT-Keepalive-4.png?resize=809%2C540\" alt=\"VOS3000 SIP Authentication Retry, VOS3000 SIP Early Hangup, VOS3000 SIP Session Timer Refresh, VOS3000 Non-Timer Endpoint Safety, VOS3000 SIP NAT Keepalive, VOS3000 SIP Resend Interval, VOS3000 SIP INVITE Timeout, VOS3000 SIP Call Progress Timeout, VOS3000 SIP Outbound Registration Parameters, VOS3000 SIP Privacy Header, VOS3000 SIP Routing Gateway Contact, VOS3000 SIP Publish Expire, VOS3000 SIP Display From, VOS3000 SIP Send Unregister\" title=\"\"><\/td><td><img data-recalc-dims=\"1\" height=\"540\" width=\"809\" decoding=\"async\" src=\"https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Authentication-Retry-VOS3000-SIP-Early-Hangup-VOS3000-SIP-Session-Timer-Refresh-VOS3000-Non-Timer-Endpoint-Safety-VOS3000-SIP-NAT-Keepalive-4.png?resize=809%2C540\" alt=\"VOS3000 SIP Authentication Retry, VOS3000 SIP Early Hangup, VOS3000 SIP Session Timer Refresh, VOS3000 Non-Timer Endpoint Safety, VOS3000 SIP NAT Keepalive, VOS3000 SIP Resend Interval, VOS3000 SIP INVITE Timeout, VOS3000 SIP Call Progress Timeout, VOS3000 SIP Outbound Registration Parameters, VOS3000 SIP Privacy Header, VOS3000 SIP Routing Gateway Contact, VOS3000 SIP Publish Expire, VOS3000 SIP Display From, VOS3000 SIP Send Unregister\" title=\"\"><\/td><td><img data-recalc-dims=\"1\" height=\"540\" width=\"809\" decoding=\"async\" src=\"https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Authentication-Retry-VOS3000-SIP-Early-Hangup-VOS3000-SIP-Session-Timer-Refresh-VOS3000-Non-Timer-Endpoint-Safety-VOS3000-SIP-NAT-Keepalive-4.png?resize=809%2C540\" alt=\"VOS3000 SIP Authentication Retry, VOS3000 SIP Early Hangup, VOS3000 SIP Session Timer Refresh, VOS3000 Non-Timer Endpoint Safety, VOS3000 SIP NAT Keepalive, VOS3000 SIP Resend Interval, VOS3000 SIP INVITE Timeout, VOS3000 SIP Call Progress Timeout, VOS3000 SIP Outbound Registration Parameters, VOS3000 SIP Privacy Header, VOS3000 SIP Routing Gateway Contact, VOS3000 SIP Publish Expire, VOS3000 SIP Display From, VOS3000 SIP Send Unregister\" title=\"\"><\/td><\/tr><\/tbody><\/table><\/figure>\n","protected":false},"excerpt":{"rendered":"<p>Master VOS3000 SIP display from with SS_SIP_E164_DISPLAY_FROM. Configure E164 caller format in From header, per-gateway display modes, caller presentation, and mapping gateway number extraction.<\/p>\n","protected":false},"author":1,"featured_media":3147,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_feature_clip_id":0,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2},"jetpack_post_was_ever_published":false},"categories":[2,681,682,684],"tags":[8612,8603,8619,6085,8648,8637,8631,8642,8639,8623,8615,8476,8647,8641,8621,8627,8629,8617,8645,8644,8636,8589,8380,8633,8634,8626,8625,8635,8638,8650,8624,8469,8614,8651,8630,8475,8620,8618,8646,8616,8622,8613,8640,8385,8628,8649,8632,8652,8532,8643],"class_list":["post-3163","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-vos3000","category-vos3000-setup","category-vos3000-setup-guide","category-vos3000-sip","tag-ss_sip_e164_display_from","tag-vos3000-additional-settings-sip-parameter","tag-vos3000-caller-display-configuration","tag-vos3000-caller-id-management","tag-vos3000-caller-number-extraction","tag-vos3000-caller-number-from-field","tag-vos3000-caller-number-presentation","tag-vos3000-caller-presentation-sip","tag-vos3000-display-field-caller-number","tag-vos3000-display-from-mode","tag-vos3000-e164-caller-format","tag-vos3000-e164-display-from","tag-vos3000-e164-formatting-voip","tag-vos3000-e164-international-format","tag-vos3000-e164-number-format","tag-vos3000-enable-local-domain-name","tag-vos3000-from-field-signaling","tag-vos3000-from-header-e164","tag-vos3000-from-header-ip-domain","tag-vos3000-gateway-display-settings","tag-vos3000-mapping-gateway-caller","tag-vos3000-mapping-gateway-caller-field","tag-vos3000-operation-management-sip-parameter","tag-vos3000-p-asserted-identity-caller","tag-vos3000-p-preferred-identity-caller","tag-vos3000-peer-number-information","tag-vos3000-per-gateway-display-settings","tag-vos3000-privacy-display-from","tag-vos3000-remote-party-id-caller","tag-vos3000-routing-gateway-display","tag-vos3000-sip-caller-id-from-header","tag-vos3000-sip-caller-identification","tag-vos3000-sip-caller-presentation","tag-vos3000-sip-display-best-practices","tag-vos3000-sip-display-configuration","tag-vos3000-sip-display-from","tag-vos3000-sip-display-from-ignore","tag-vos3000-sip-display-information","tag-vos3000-sip-display-information-mode","tag-vos3000-sip-display-mode","tag-vos3000-sip-from-header-caller","tag-vos3000-sip-from-header-display","tag-vos3000-sip-from-header-format","tag-vos3000-sip-protocol-parameters","tag-vos3000-sip-signal-caller","tag-vos3000-sip-signaling-caller","tag-vos3000-softswitch-display-from","tag-vos3000-softswitch-sip-display","tag-vos3000-ss_sip_user_agent_privacy","tag-vos3000-voip-display-from-setup"],"acf":[],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Routing-Gateway-Contact-VOS3000-SIP-Publish-Expire-VOS3000-SIP-Display-From-VOS3000-SIP-Send-Unregister.png?fit=1536%2C1024&ssl=1?v=1776736568","jetpack-related-posts":[{"id":3153,"url":"https:\/\/multahost.com\/blog\/vos3000-sip-privacy-header\/","url_meta":{"origin":3163,"position":0},"title":"VOS3000 SIP Privacy Header: Essential Caller ID Protection Guide","author":"king","date":"April 21, 2026","format":false,"excerpt":"Master VOS3000 SIP privacy header with SS_SIP_USER_AGENT_PRIVACY. Configure Ignore\/Id\/None modes, per-gateway Privacy, P-Asserted-Identity, and caller ID protection.","rel":"","context":"In &quot;VOS3000 SIP&quot;","block_context":{"text":"VOS3000 SIP","link":"https:\/\/multahost.com\/blog\/category\/vos3000-sip\/"},"img":{"alt_text":"VOS3000 SIP Authentication Retry, VOS3000 SIP Early Hangup, VOS3000 SIP Session Timer Refresh, VOS3000 Non-Timer Endpoint Safety, VOS3000 SIP NAT Keepalive, VOS3000 SIP Resend Interval, VOS3000 SIP INVITE Timeout, VOS3000 SIP Call Progress Timeout, VOS3000 SIP Outbound Registration Parameters, VOS3000 SIP Privacy Header, VOS3000 SIP Routing Gateway Contact, VOS3000 SIP Publish Expire, VOS3000 SIP Display From, VOS3000 SIP Send Unregister","src":"https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Call-Progress-Timeout-VOS3000-SIP-Outbound-Registration-Parameters-VOS3000-SIP-Privacy-Header-VOS3000-SIP-Routing-Gateway-Contact-VOS3000-SIP-Publish-Expire-VOS3000-SIP-Display-From.png?fit=1200%2C800&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Call-Progress-Timeout-VOS3000-SIP-Outbound-Registration-Parameters-VOS3000-SIP-Privacy-Header-VOS3000-SIP-Routing-Gateway-Contact-VOS3000-SIP-Publish-Expire-VOS3000-SIP-Display-From.png?fit=1200%2C800&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Call-Progress-Timeout-VOS3000-SIP-Outbound-Registration-Parameters-VOS3000-SIP-Privacy-Header-VOS3000-SIP-Routing-Gateway-Contact-VOS3000-SIP-Publish-Expire-VOS3000-SIP-Display-From.png?fit=1200%2C800&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Call-Progress-Timeout-VOS3000-SIP-Outbound-Registration-Parameters-VOS3000-SIP-Privacy-Header-VOS3000-SIP-Routing-Gateway-Contact-VOS3000-SIP-Publish-Expire-VOS3000-SIP-Display-From.png?fit=1200%2C800&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Call-Progress-Timeout-VOS3000-SIP-Outbound-Registration-Parameters-VOS3000-SIP-Privacy-Header-VOS3000-SIP-Routing-Gateway-Contact-VOS3000-SIP-Publish-Expire-VOS3000-SIP-Display-From.png?fit=1200%2C800&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":3208,"url":"https:\/\/multahost.com\/blog\/vos3000-caller-source-header-selection\/","url_meta":{"origin":3163,"position":1},"title":"VOS3000 Caller Source Header Selection Complete From Remote-Party-ID Display Important","author":"king","date":"April 21, 2026","format":false,"excerpt":"VOS3000 caller source header selection configures CLI extraction from From, Remote-Party-ID, or Display headers. Accurate caller ID for mapping gateway routing.","rel":"","context":"In &quot;VOS3000&quot;","block_context":{"text":"VOS3000","link":"https:\/\/multahost.com\/blog\/category\/vos3000\/"},"img":{"alt_text":"VOS3000 Caller Source Header, VOS3000 Callee Source Header, VOS3000 Remote Ring Back Mode, VOS3000 Call Forward Signal Recognition, VOS3000 Replace Failed Reason","src":"https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Caller-Source-Header-VOS3000-Callee-Source-Header-VOS3000-Remote-Ring-Back-Mode-VOS3000-Call-Forward-Signal-Recognition-VOS3000-Replace-Failed-Reason.png?fit=1200%2C800&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Caller-Source-Header-VOS3000-Callee-Source-Header-VOS3000-Remote-Ring-Back-Mode-VOS3000-Call-Forward-Signal-Recognition-VOS3000-Replace-Failed-Reason.png?fit=1200%2C800&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Caller-Source-Header-VOS3000-Callee-Source-Header-VOS3000-Remote-Ring-Back-Mode-VOS3000-Call-Forward-Signal-Recognition-VOS3000-Replace-Failed-Reason.png?fit=1200%2C800&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Caller-Source-Header-VOS3000-Callee-Source-Header-VOS3000-Remote-Ring-Back-Mode-VOS3000-Call-Forward-Signal-Recognition-VOS3000-Replace-Failed-Reason.png?fit=1200%2C800&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Caller-Source-Header-VOS3000-Callee-Source-Header-VOS3000-Remote-Ring-Back-Mode-VOS3000-Call-Forward-Signal-Recognition-VOS3000-Replace-Failed-Reason.png?fit=1200%2C800&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":3162,"url":"https:\/\/multahost.com\/blog\/vos3000-sip-routing-gateway-contact\/","url_meta":{"origin":3163,"position":2},"title":"VOS3000 SIP Routing Gateway Contact: Essential INVITE Header Guide","author":"king","date":"April 21, 2026","format":false,"excerpt":"Master VOS3000 SIP routing gateway contact with SS_SIP_ROUTING_GATEWAY_INVITE_USE_CONTACT. Configure Contact header routing, request-line callee handling, and To field preservation for VoIP softswitch.","rel":"","context":"In &quot;VOS3000&quot;","block_context":{"text":"VOS3000","link":"https:\/\/multahost.com\/blog\/category\/vos3000\/"},"img":{"alt_text":"VOS3000 SIP Authentication Retry, VOS3000 SIP Early Hangup, VOS3000 SIP Session Timer Refresh, VOS3000 Non-Timer Endpoint Safety, VOS3000 SIP NAT Keepalive, VOS3000 SIP Resend Interval, VOS3000 SIP INVITE Timeout, VOS3000 SIP Call Progress Timeout, VOS3000 SIP Outbound Registration Parameters, VOS3000 SIP Privacy Header, VOS3000 SIP Routing Gateway Contact, VOS3000 SIP Publish Expire, VOS3000 SIP Display From, VOS3000 SIP Send Unregister","src":"https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Call-Progress-Timeout-VOS3000-SIP-Outbound-Registration-Parameters-VOS3000-SIP-Privacy-Header-VOS3000-SIP-Routing-Gateway-Contact-VOS3000-SIP-Publish-Expire-VOS3000-SIP-Display-From.png?fit=1200%2C800&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Call-Progress-Timeout-VOS3000-SIP-Outbound-Registration-Parameters-VOS3000-SIP-Privacy-Header-VOS3000-SIP-Routing-Gateway-Contact-VOS3000-SIP-Publish-Expire-VOS3000-SIP-Display-From.png?fit=1200%2C800&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Call-Progress-Timeout-VOS3000-SIP-Outbound-Registration-Parameters-VOS3000-SIP-Privacy-Header-VOS3000-SIP-Routing-Gateway-Contact-VOS3000-SIP-Publish-Expire-VOS3000-SIP-Display-From.png?fit=1200%2C800&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Call-Progress-Timeout-VOS3000-SIP-Outbound-Registration-Parameters-VOS3000-SIP-Privacy-Header-VOS3000-SIP-Routing-Gateway-Contact-VOS3000-SIP-Publish-Expire-VOS3000-SIP-Display-From.png?fit=1200%2C800&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Call-Progress-Timeout-VOS3000-SIP-Outbound-Registration-Parameters-VOS3000-SIP-Privacy-Header-VOS3000-SIP-Routing-Gateway-Contact-VOS3000-SIP-Publish-Expire-VOS3000-SIP-Display-From.png?fit=1200%2C800&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":2891,"url":"https:\/\/multahost.com\/blog\/vos3000-p-asserted-identity-caller-id\/","url_meta":{"origin":3163,"position":3},"title":"VOS3000 P-Asserted-Identity: Caller ID Manipulation Important Guide for VoIP","author":"king","date":"April 13, 2026","format":false,"excerpt":"VOS3000 P-Asserted-Identity caller ID manipulation guide. Configure PAI, Privacy, P-Preferred-Identity headers for trusted caller ID presentation and compliance.","rel":"","context":"In &quot;VOS3000&quot;","block_context":{"text":"VOS3000","link":"https:\/\/multahost.com\/blog\/category\/vos3000\/"},"img":{"alt_text":"VOS3000 P-Asserted-Identity, VOS3000 Web Manager, VOS3000 DTMF Configuration, VOS3000 Agent Account, VOS3000 Transcoding","src":"https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-P-Asserted-Identity-VOS3000-Web-Manager-VOS3000-DTMF-Configuration-VOS3000-Agent-Account-VOS3000-Transcoding.png?fit=1200%2C800&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-P-Asserted-Identity-VOS3000-Web-Manager-VOS3000-DTMF-Configuration-VOS3000-Agent-Account-VOS3000-Transcoding.png?fit=1200%2C800&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-P-Asserted-Identity-VOS3000-Web-Manager-VOS3000-DTMF-Configuration-VOS3000-Agent-Account-VOS3000-Transcoding.png?fit=1200%2C800&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-P-Asserted-Identity-VOS3000-Web-Manager-VOS3000-DTMF-Configuration-VOS3000-Agent-Account-VOS3000-Transcoding.png?fit=1200%2C800&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-P-Asserted-Identity-VOS3000-Web-Manager-VOS3000-DTMF-Configuration-VOS3000-Agent-Account-VOS3000-Transcoding.png?fit=1200%2C800&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":3209,"url":"https:\/\/multahost.com\/blog\/vos3000-callee-source-header\/","url_meta":{"origin":3163,"position":4},"title":"VOS3000 Callee Source Header Flexible To Request-Line Selection Important","author":"king","date":"April 21, 2026","format":false,"excerpt":"VOS3000 callee source header selects destination number from To header or Request-Line. Configure dialed number extraction for accurate routing and billing.","rel":"","context":"In &quot;VOS3000&quot;","block_context":{"text":"VOS3000","link":"https:\/\/multahost.com\/blog\/category\/vos3000\/"},"img":{"alt_text":"VOS3000 Caller Source Header, VOS3000 Callee Source Header, VOS3000 Remote Ring Back Mode, VOS3000 Call Forward Signal Recognition, VOS3000 Replace Failed Reason","src":"https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Caller-Source-Header-VOS3000-Callee-Source-Header-VOS3000-Remote-Ring-Back-Mode-VOS3000-Call-Forward-Signal-Recognition-VOS3000-Replace-Failed-Reason-1.png?fit=1200%2C800&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Caller-Source-Header-VOS3000-Callee-Source-Header-VOS3000-Remote-Ring-Back-Mode-VOS3000-Call-Forward-Signal-Recognition-VOS3000-Replace-Failed-Reason-1.png?fit=1200%2C800&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Caller-Source-Header-VOS3000-Callee-Source-Header-VOS3000-Remote-Ring-Back-Mode-VOS3000-Call-Forward-Signal-Recognition-VOS3000-Replace-Failed-Reason-1.png?fit=1200%2C800&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Caller-Source-Header-VOS3000-Callee-Source-Header-VOS3000-Remote-Ring-Back-Mode-VOS3000-Call-Forward-Signal-Recognition-VOS3000-Replace-Failed-Reason-1.png?fit=1200%2C800&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Caller-Source-Header-VOS3000-Callee-Source-Header-VOS3000-Remote-Ring-Back-Mode-VOS3000-Call-Forward-Signal-Recognition-VOS3000-Replace-Failed-Reason-1.png?fit=1200%2C800&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":2705,"url":"https:\/\/multahost.com\/blog\/vos3000-caller-id-management-complete\/","url_meta":{"origin":3163,"position":5},"title":"VOS3000 Caller ID Management: Complete CLI Configuration Important Guide","author":"king","date":"April 9, 2026","format":false,"excerpt":"Master VOS3000 caller ID management with our complete CLI configuration guide. Learn caller number handling, prefix filtering, dial plans, and number transformation based on official manual.","rel":"","context":"In &quot;VOS3000&quot;","block_context":{"text":"VOS3000","link":"https:\/\/multahost.com\/blog\/category\/vos3000\/"},"img":{"alt_text":"VOS3000 Professional Installation, VOS3000 Dedicated Server Rental, VOS3000 Web API Account Management, VOS3000 Profit Margin, VOS3000 Daily Operations, VOS3000 Caller ID Management WhatsApp: +8801911119966 for your VOS3000 Services, VOS3000 One Time Installations and VOS3000 Server Rental","src":"https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Professional-Installation-Dedicated-Server-Rental-Web-API-Account-Management-Profit-Margin-Daily-Operations-Caller-ID-Management-8.png?fit=1200%2C800&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Professional-Installation-Dedicated-Server-Rental-Web-API-Account-Management-Profit-Margin-Daily-Operations-Caller-ID-Management-8.png?fit=1200%2C800&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Professional-Installation-Dedicated-Server-Rental-Web-API-Account-Management-Profit-Margin-Daily-Operations-Caller-ID-Management-8.png?fit=1200%2C800&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Professional-Installation-Dedicated-Server-Rental-Web-API-Account-Management-Profit-Margin-Daily-Operations-Caller-ID-Management-8.png?fit=1200%2C800&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/multahost.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Professional-Installation-Dedicated-Server-Rental-Web-API-Account-Management-Profit-Margin-Daily-Operations-Caller-ID-Management-8.png?fit=1200%2C800&ssl=1&resize=1050%2C600 3x"},"classes":[]}],"jetpack_sharing_enabled":true,"jetpack_likes_enabled":true,"_links":{"self":[{"href":"https:\/\/multahost.com\/blog\/wp-json\/wp\/v2\/posts\/3163","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/multahost.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/multahost.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/multahost.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/multahost.com\/blog\/wp-json\/wp\/v2\/comments?post=3163"}],"version-history":[{"count":0,"href":"https:\/\/multahost.com\/blog\/wp-json\/wp\/v2\/posts\/3163\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/multahost.com\/blog\/wp-json\/wp\/v2\/media\/3147"}],"wp:attachment":[{"href":"https:\/\/multahost.com\/blog\/wp-json\/wp\/v2\/media?parent=3163"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/multahost.com\/blog\/wp-json\/wp\/v2\/categories?post=3163"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/multahost.com\/blog\/wp-json\/wp\/v2\/tags?post=3163"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}